Figure 5-83
Click Add button, the interface is shown as below. See Figure 5-84.
Type: Here you can select smart track mode. It includes: 1 fish eye+1 PTZ camera/1 fish eye+2 PTZ
cameras/1 fish eye+3 PTZ cameras.
Scene: It is the monitor position. Input customized monitor position name.
Main channel: Click Select button and then select fish eye from the dialogue box. Now you can view
channel number and channel name.
PTZ camera: Click Select button and then select corresponding PTZ camera amount from the
dialogue box. Now you can view PTZ camera channel number, channel name and IP address.
Click OK to complete the setup.
Figure 5-84
After you go back to the smart track interface, it is shown as in Figure 5-85.
To Next Page
Loading...
