RAID.
Local: It is local hotspare disk. When the specified RAID becomes degrading, it can replace and
build the RAID.
Select a hot spare device and then click Delete button . Click Apply button to delete.
Figure 5-110
5.5.4.6 iSCSI
From main menu->Setup->Storage->iSCSI, you can see an interface shown as in Figure 5-111. Here you
can set corresponding HDD group to save main stream.
Figure 5-111
Check the box to enable iSCSI function and then input iSCSI server IP address and port. The default port
number is 3260.
Click Set path button, system pops up the path setup dialogue box. Please select the connected path and
To Next Page
Loading...
