Dahua HCVR82**A-S3 Series - Page 314

302
Device No.
It is device channel number.
Language
You can select the language from the dropdown list.
Please note the device needs to reboot to get the modification
activated.
Video
Standard
This is to display video standard such as PAL.
HDD full
Here is for you to select working mode when hard disk is full. There
are two options: stop recording or rewrite. If current working HDD is
overwritten or the current HDD is full while the next HDD is no empty,
then system stops recording, If the current HDD is full and then next
HDD is not empty, then system overwrites the previous files.
Pack
duration
Here is for you to specify record duration. There are two ways for you
to set.
 Time length: It is to pack according to time. The value ranges
from 1 to 60 minutes. Default value is 60 minutes.
 File length: It is to pack according to file length. The default setup
is 1024M. The value ranges from 128M to 2048M.
Auto logout
Here is for you to set auto logout interval once login user remains
inactive for a specified time. Value ranges from 0 to 60 minutes.
IPC Time
Sync
You can input an interval here to synchronize the DVR time and IPC
time.
Navigation
bar
Check the box here, system displays the navigation bar on the
interface.
Startup
wizard
Once you check the box here, system will go to the startup wizard
directly when the system restarts the next time. Otherwise, it will go
to the login interface.
5.5.5.1.2 Date and time
From main menu->Setup->System->General->Date and time, the date and time interface is shown as in
Figure 5-115.