Figure 5-115
Please refer to the following sheet for detailed information.
Here you can select date format from the dropdown list.
There are two options: 24-H and 12-H.
The time zone of the device.
It is to set system time. It becomes valid after you set.
You can click this button to save the system time as your PC current
time.
Here you can set day night save time begin time and end time. You
can set according to the date format or according to the week format.
You can check the box to enable NTP function.
You can set the time server address.
Check the NTP box to enable this function.
Host IP: Input the server IP that installed the NTP server.
Manual update: Click it, you can sync DVR time with the NTP
server manually.
Port: System supports TCP transmission only. The port value is
123.
Interval: It is to set the sync time interval between the DVR and
To Next Page
Loading...
