Hidden user “default” is for system interior use only and can not be deleted. When there is no login user,
hidden user “default” automatically login. You can set some rights such as monitor for this user so that
you can view some channel view without login.
Here you can input the user name and password and then select one group for current user.
Please note the user rights shall not exceed the group right setup.
For convenient setup, please make sure the general user has the lower rights setup than the admin.
Figure 5-135
Modify user
It is to modify the user property, belonging group, password and rights. See Figure 5-136.
Modify password
It is to modify the user password. You need to input the old password and then input the new password
twice to confirm the new setup. Please click the OK button to save.
Please note, the password ranges from 1-digit to 32-digit. The space at the front or the end is null. The
password can contain the space in the middle. For the user of the account rights, he can modify the
password of other users.
To Next Page
Loading...
Need help?
General