Figure 5-133
Please refer to the following sheet for detailed information.
There are six periods. Check the box to enable current setup.
It is to set audio file repeat times in the specified period.
It is the audio file repeated interval in the specified period.
There are two options: MIC (default)/audio. When reuse the MIC port
and bidirectional talk port, the bidirectional port has the higher priority.
Please note some series product does not support audio function.
Note
The audio file end time depends on the audio file size and the interval setup.
Priority: Bidirectional talk>Event trigger alarm>Trial listening>Audio schedule broadcast.
5.5.5.8 Account
Note:
For the user name, the string max length is 31-byte, and for the user group, the string max length is
15-byte. The backspace in front of or at the back of the string is invalid. There can be backspace in
the middle. The string includes the valid character, letter, number, underline, subtraction sign, and
dot.
The default user amount is 64 and the default group amount is 20. System account adopts two-level
management: group and user. No limit to group or user amount.
For group or user management, there are two levels: admin and user. The user name shall be
unique and one user shall only belong to one group.
5.5.5.8.1 User name
From main menu->Setup->System->Account->User, in this interface you can add/remove user and
modify user name. See Figure 5-134.
Figure 5-134
Add user: It is to add a name to group and set the user rights. See Figure 5-135.
There are three default users: admin (password: admin)/888888(password: 888888) and hidden user
“default”.
To Next Page
Loading...
Need help?
General