Dahua NVR2104-I2 User Manual

Figure 5-62 Manual add
Step 4 Congure the parameters.
The parameters might vary depending on the manufacturer that you select.
Table 5-17 Remote channel parameters
Parameter
Description
Channel
Select the channel that you want use on the Device to connect the
remote device.
Manufacturer Select the manufacturer of the remote device.
Registration ID Enter the registration ID of the remote device.
IP Address Enter the IP address of the remote device.
RTSP Port Enter the RTSP port number. The default value is 554.
HTTP Port Enter the HTTP port number. The default value is 80.
TCP Port The default value is 37777. You can enter the value as needed.
Username Enter the username of the remote device.
Password Enter the password of the user for the remote device.
Total Channels
Click Connect to get the total number of channels of the remote
device.
Remote CH No. Enter the remote channel number of the remote device.
Decode Strategy Select Default , Realtime, or Fluent.
User's Manual
170

Dahua NVR2104-I2 Specifications

General

Brand	Dahua
Model	NVR2104-I2
Category	Network Hardware
Language	English