Icon Function
●
AcuPick. Fordetails, see "5.8.2.4 AcuPick".
5.8.2.3 Smart Search Playback
Background Information
This function is for some models only.
During the playback process, the system can analyze the motion detection zone in the scene and
give the analysis result.
Make sure that motion detection has been enabled in Main Menu > ALARM > Video Detection >
Motion Detection.
Procedure
Step 1 Select a channel to playback video and then click . You can view the grids on the
playback video.
●
This function is for one-channel playback mode.
●
In multiple-channel playback mode, double-click a channel to switch to one-channel
playback mode.
Step 2 Select smart search zones (22*18(PAL), 22*15(NTSC)).
Step 3 Click to go to smart search and playback. The system is going to play back all motion
detection record footage.
Step 4 Click again to stop smart search.
●
The motion detection region cannot be the full screen zone.
●
The motion detection region adopts the current whole play pane by default.
●
The time bar unit switch, rewinding, frame by frame are not available when the system
is playing a motion detection le.
5.8.2.4 AcuPick
5.8.2.4.1 Common Search
Procedure
Step 1 Select Main Menu > SEARCH, or right-click on the live view page and then select Search.
Step 2 (Optional) Click to select the displayed results. You can choose Human and Motor
Vehicle.
Step 3 When you want to search the target in the image, click to freeze the page. The image
automatically shows the targets.
User's Manual
197
To Next Page
Loading...
Need help?
General
