Figure 5-135 Schedule and alarm linkage
1. Click .
2. Click Setting next to Schedule to congure the alarm period.
The system performs linkage actions only for alarms during the arming period.
●
On the time line, drag to set the period.
●
You can also click to set the period.
3. Congure alarm linkage. For details, see Table 5-47 .
4. Click Apply.
Step 7 Select Enable checkbox and then click Apply.
5.9.6.2.5 Parking
Background Information
When the detection target stays in the monitoring area longer than the set duration, the system
performs alarm linkage action.
Procedure
Step 1 Select Main Menu > AI > Parameters > IVS.
User's Manual
243
To Next Page
Loading...
Need help?
General
