Dahua NVR2104-I2 User Manual

Figure 5-258 Basic services
Step 2 Enable the system services.
There might be safety risk when Mobile Push Notications, CGI, ONVIF, SSH and NTP
Server is enabled. Disable these functions when they are not needed.
Table 5-74 Basic service parameters
Parameter
Description
Mobile Push Notications
After enabling this function, the alarm triggered by the NVR can be
pushed to a mobile phone. This function is enabled by default.
CGI
If this function is enabled, the remote devices can be added through
the CGI protocol. This function is enabled by default.
ONVIF
If this function is enabled, the remote devices can be added through
the ONVIF protocol. This function is enabled by default.
NTP Server
After enabling this function, a NTP server can be used for time
synchronization. This function is enabled by default.
SSH
After enabling this function, you can use SSH service. This function is
disabled by default.
Enable Device Discovery
After enabling this function, the NVR can be found by other devices
through searching.
User's Manual
371

Dahua NVR2104-I2 Specifications

General

Brand	Dahua
Model	NVR2104-I2
Category	Network Hardware
Language	English