Dahua NVR2104-I2

Figure 5-273 Date and time
Step 2 Congure the settings for date and time parameters.
Table 5-80 Data and time parameters
Parameter
Description
System Time
In the System Time box, enter time for the system.
Click the time zone list, you can select a time zone for the system,
and the time in adjust automatically.
Do not change the system time randomly; otherwise the recorded
video cannot be searched. It is recommended to avoid the recording
period or stop recording rst before you change the system time.
Time Zone In the Time Zone list, select a time zone for the system.
Date Format In the Date Format list, select a date format for the system.
Date Separator In the Date Separator list, select a separator style for the date.
Time Format
In the Time Format list, select 12-HOUR or 24-HOUR for the time
display style.
DST Enable the Daylight Saving Time function. Click Week or Date.
Start Time
Congure the start time and end time for the DST.
End Time
NTP Enable the NTP function to sync the Device time with the NTP server.
User's Manual
386