Parameter Description
If NTP is enabled, device time will be automatically synchronized
with server.
Server Address
In the Server Address box, enter the IP address or domain name of
the corresponding NTP server.
Click Manual Update, the Device starts syncing with the server
immediately.
Port The system supports TCP protocol only and the default setting is 123.
Interval
In the Interval box, enter the amount of time that you want the
Device to sync time with the NTP server. The value ranges from 0 to
65535.
Step 3 Click Next to save settings.
5.15.1.3 Holiday
Background Information
Here you can add, edit, and delete holiday. After you successfully set holiday information, you can
view holiday item on the record and snapshot period.
You can also conîš‚gure holiday settings by selecting Main Menu > SYSTEM > General > Holiday.
Procedure
Step 1 Click Next.
Figure 5-274 Holiday
Step 2 Click Add Holidays.
User's Manual
387
To Next Page
Loading...
Need help?
General
