Danfoss iC2 User Manual

Application Guide | iC2-Micro Frequency Converters
Parameter
number:
143 Unit: Ft
Data type: uint16 Access type: Read/Write
In some products, depending on the EMC configuration, this parameter may adjust the allowable switching frequency automatically to
achieve optimum performance of the drive system.
7.5.2.2 Nameplate Data (Menu Index 4.2.2)
P 4.2.2.1 Nominal Power
Set the nominal motor power from the motor nameplate data. Note: Changing this parameter affects the settings of other parameters.
Default value: Size Related Parameter type: Range (Size Related)
Parameter
number:
120 Unit: kW
Data type: uint16 Access type: Read/Write
P 4.2.2.2 Nominal Voltage
Set the nominal motor voltage from the motor nameplate data. Note: Changing this parameter affects settings of other parameters.
Default value: Size Related Parameter type: Range (50–1000)
Parameter
number:
122 Unit: V
Data type: uint16 Access type: Read/Write
P 4.2.2.3 Nominal Current
Enter the nominal motor current value from the motor nameplate data. Note: Changing this parameter affects the settings of other
parameters.
Default value: Size Related Parameter type: Range (0.01–1000.00)
Parameter
number:
124 Unit: A
Data type: uint32 Access type: Read/Write
P 4.2.2.4 Nominal Frequency
Select the motor frequency value from the motor nameplate data. Note: Changing this parameter affects settings of other parameters.
Default value: Size Related Parameter type: Range (Size Related)
Parameter
number:
123 Unit: Hz
Data type: uint16 Access type: Read/Write
P 4.2.2.5 Nominal Speed
Enter the nominal motor speed value from the motor nameplate data. Note: Changing this parameter affects settings of other
parameters.
Danfoss A/S © 2024.03 AB413939445838en-000301 / 130R1254 | 125

Danfoss iC2 Specifications

General

Brand	Danfoss
Model	iC2
Category	Media Converter
Language	English