Danfoss iC2 - Introduction and Safety; Safety Symbols

Application Guide | iC2-Micro Frequency Converters
Contents
Contents
1 Introduction and Safety
1.1 Purpose of this Application Guide 11
1.2 Additional Resources 11
1.3 Version History 11
1.4 Safety Symbols 11
1.5 General Safety Considerations 12
1.6 Qualified Personnel 13
2 Application Software Overview
2.1 iC2-Micro Application Software Overview 14
2.2 Basic Functions 14
2.2.1 Basic Functions Overview 14
2.2.2 Reference Handling 14
2.2.3 Two Setups 14
2.2.4 Ramps 14
2.2.5 Quick Stop 14
2.2.6 Limit Rotation Direction 14
2.2.7 Motor Phase Switch 15
2.2.8 Inching with Jogging Modes 15
2.2.9 Frequency Bypass 15
2.2.10 Automatic Restart 15
2.2.11 Flying Start 15
2.2.12 Mains Dropout 15
2.2.13 Kinetic Backup 15
2.2.14 Resonance Damping 15
2.2.15 Mechanical Brake Control 15
2.2.16 Controllers 15
2.3 IO Control and Readouts 16
2.4 Motor Control Features 16
2.4.1 Motor Control Features Overview 16
2.4.2 Motor Types 16
2.4.3 Load Characterstics 16
2.4.4 Motor Control Principle 16
2.4.5 Motor Nameplate and Catalog 16
Danfoss A/S © 2024.03 AB413939445838en-000301 / 130R1254 | 3