Danfoss iC2 - 7.10.2 FC Port Diagnostics (Menu Index 10.2)

Application Guide | iC2-Micro Frequency Converters
7.10.2 FC Port Diagnostics (Menu Index 10.2)
P 10.2.1 Bus Message Count
This parameter shows the number of valid telegrams detected on the bus.
Default value: 0 Parameter type: Range (0–4294967295)
Parameter
number:
880 Unit: –
Data type: uint32 Access type: Read
P 10.2.1 Bus Error Count
This parameter shows the number of telegrams with faults (for example, CRC fault), detected on the bus.
Default value: 0 Parameter type: Range (0–4294967295)
Parameter
number:
881 Unit: –
Data type: uint32 Access type: Read
P 10.2.3 Slave Messaged Rcvd
This parameter shows the number of valid telegrams addressed to the slave, sent by the frequency converter.
Default value: 0 Parameter type: Range (0–4294967295)
Parameter
number:
882 Unit: –
Data type: uint32 Access type: Read
P 10.2.4 Slave Error Count
This parameter shows the number of valid telegrams addressed to the slave, sent by the frequency converter.
Default value: 0 Parameter type: Range (0–4294967295)
Parameter
number:
883 Unit: –
Data type: uint32 Access type: Read
P 10.2.5 Slave Messages Sent
This parameter shows the number of messages sent from the slave.
Default value: 0 Parameter type: Range (0–4294967295)
Parameter
number:
884 Unit: –
Data type: uint32 Access type: Read
Danfoss A/S © 2024.03 AB413939445838en-000301 / 130R1254 | 259