Application Guide | iC2-Micro Frequency Converters
Figure 26: Operate Drive using MyDrive® Insight
To access PC Control in MyDrive® Insight and operate the drive, perform the following:
1. Click the REQUEST CONTROL button.
2. Click Continue, to confirm secure operation conditions, while controlling the drive using MyDrive® Insight.
3. Use the START, STOP, STOP COAST buttons to perform a drive operation.
4. Increase or decrease the reference speed.
5. In case of a fault event, click RESET FAULTS to reset a drive.
3.3.6 Backing Up the Drive
1. To back up the drive, select a drive, go to Setup & Services → Parameters.
The Parameters Live screen appears.
2. Click the icon as shown in the figure.
Danfoss A/S © 2024.03 AB413939445838en-000301 / 130R1254 | 41
To Next Page
Loading...
