Danfoss iC2 - 7.8 Customization (Menu Index 8); 7.8.1 Custom Readout (Menu Index 8.1)

7.8 Customization (Menu Index 8)
7.8.1 Custom Readout (Menu Index 8.1)
P 8.1.1 Custom Readout
View the user-defined readouts as defined in parameters P 8.1.2 Custom Readout Unit, P 8.1.3 Custom Readout Min Value, and P 8.1.4
Custom Readout Max Value.
Default value: 0.00 Parameter type: Range (0.00–9999.00)
Parameter
number:
1609 Unit: CustomReadoutUnit
Data type: int32 Access type: Read
P 8.1.1 Custom Readout Unit
Set the user-defined readouts unit.
Default value: 1 [%] Parameter type: Selection
Parameter
number:
30 Unit: –
Data type: enum Access type: Read/Write
The following are the available selections for the parameter.
Selection number Selection name
0 None
1 %
5 PPM
10 1/min
11 RPM
12 Pulse/s
20 l/s
21 l/min
22 l/h
23 m³/s
24 m³/min
25 m³/h
30 kg/s
31 kg/min
32 kg/h
33 t/min
198 | Danfoss A/S © 2024.03 AB413939445838en-000301 / 130R1254
Application Guide | iC2-Micro Frequency Converters