Danfoss iC2 - MyDrive Insight

e30bv149.10
1-(1)
1-(2)
2-(1)
2-(2)
3 4
Ramp 1 Accel. Time
LOC0.0 Hz1
(
1
)
5.00 s
5.5.4.1 Ramp 1 Type Selec
LOC
0.0 Hz
1
(
1
)
Ramp
5.5.4.2 Ramp 1 Accel. Time
Ramp 1 Accel. Time
LOC
0.0 Hz
1
(
1
)
0005.00 s
Ramp 1 Accel. Time
LOC0.0 Hz1
(
1
)
0003.00 s
Ramp 1 Accel. Time
LOC0.0 Hz1
(
1
)
3.00 s
Ramp 1 Accel. Time
LOC
0.0 Hz
1
(
1
)
0003.00 s
Figure 18: Changing Value in a Parameter
3.3 MyDrive® Insight
3.3.1 Overview of MyDrive® Insight
MyDrive® Insight is a platform-independent software tool that supports the commissioning, engineering, and monitoring of iC2-Micro
Frequency Converters. Some of the key features include:
l Fast and easy configuration and commissioning.
l Monitor the drives as part of daily operations.
l Collect data and information for troubleshooting, maintenance, and service.
l Discovery of and access to multiple drives in a network.
l Intuitive user interface.
l Notifications and visualizations on real-time information and events about the drive.
l PC control to perform operations such as starting or stopping the drive, set references, set direction, reset, and coast of the drive.
l Perform updates on single drives.
l Backup and restore of parameter settings.
l Data logging and analyzing for troubleshooting.
 NOTICE
The section is documented for MyDrive® Insight version 2.13.0 or above. Make sure to uninstall lower versions of MyDrive® Insight
from your device to use the latest MyDrive® Insight functions.
 NOTICE
The section MyDrive® Insight in the application guide covers basic information such as getting started with MyDrive® Insight,
accessing and viewing or changing the parameters, and PC control to operate the drive using MyDrive® Insight. For further
information on the different MyDrive screens, integrated help within MyDrive® Insight will be available in future releases.
34 | Danfoss A/S © 2024.03 AB413939445838en-000301 / 130R1254
Application Guide | iC2-Micro Frequency Converters