2.4.6 Automatic Motor Adaptation (AMA) 17
2.4.7 Automation Energy Optimization (AEO) 17
2.5 Braking of Load 17
2.5.1 Braking of Load Overview 17
2.5.2 Resistor Braking 17
2.5.3 Overvoltage Control (OVC) 17
2.5.4 DC Brake 17
2.5.5 AC Brake 17
2.5.6 DC Hold 17
2.5.7 Load Sharing 17
2.6 Protection Features 17
2.6.1 Grid Protections 17
2.6.2 Drive Protection Features 18
2.6.3 Motor Protection Features 18
2.6.4 Protection of Externally Connected Components 18
2.6.5 Automatic Derating 18
2.7 Monitoring Features 18
2.7.1 Monitoring Features Overview 18
2.7.2 Speed Monitoring 18
2.7.3 Event Log and Operational Counters 19
2.8 Software Tools 19
2.8.1 Software Tools Overview 19
2.8.2 MyDrive® Select 19
2.8.3 MyDrive® Harmonics 19
2.8.4 MyDrive® ecoSmart™ 19
2.8.5 MyDrive® Insight 19
3 User Interfaces and How to Configure
3.1 Overview of User Interfaces 20
3.2 Control Panel 20
3.2.1 Overview of Control Panel 20
3.2.2 Control Panel and Control Panel 2.0 OP2 20
3.2.3 Control Panel Buttons and Indicators 21
3.2.4 Control Panel Basic Configuration 23
3.2.4.1 Overview of Control Panel Basic Configuration 23
3.2.4.2 Understanding Readout Screens 23
4 | Danfoss A/S © 2024.03 AB413939445838en-000301 / 130R1254
Application Guide | iC2-Micro Frequency Converters
To Next Page
Loading...
