Danfoss VLT AQUA Drive FC 202 Design Guide

When bit 14=1, the limit selected in 4-16 Torque Limit
Motor Mode or 4-17 Torque Limit Generator Mode is
exceeded.
Bit 15, Timer OK/Timer exceeded
When bit 15=0, the timers for the thermal motor
protection and thermal adjustable frequency drive
protection have not exceeded 100%.
When bit 15=1, one of the timers has exceeded 100%.
3.9 System Design Checklist
Table 3.50 provides a checklist for integrating an adjustable frequency drive into a motor control system. The list is intended
as a reminder of the general categories and options necessary for specifying the system requirements.
Category Details Notes
☑
FC Model
Power
Volts
Current
Physical
Dimensions
Weight
Ambient operating conditions
Temperature
Altitude
Humidity
Air quality/dust
Derating requirements
Enclosure size
Input
Cables
Type
Length
Fuses
Type
Size
Rating
Options
Connectors
Contacts
Filters
Output
Cables
Type
Length
Fuses
Type
Size
Rating
Options
Filters
Control
Wiring
Type
Length
System Integration
VLT
®
AQUA Drive FC 202
98 Danfoss A/S © 09/2014 All rights reserved. MG20N622
33

Danfoss VLT AQUA Drive FC 202 Specifications

General

Brand	Danfoss
Model	VLT AQUA Drive FC 202
Category	DC Drives
Language	English