Delem DA-66T User Manual

V0913, II
Preface
This manual describes the operation of the Delem control type DA-66T and is meant for oper-
ators who are instructed for operation of the total machine.
Delem Limited warranty
• This manual does not entitle you to any rights. Delem reserves the right to change this
manual without prior warning.
• All rights reserved. The copyright is held by Delem. No part of this publication may be
copied or reproduced without written permission from Delem BV.
Version history
The control software is updated regularly to increase performance and add new functionality.
This manual is also updated as a result of changes in the control software. The following over-
view shows the relation between software and manual versions.
This manual is valid for software version 2.3 and higher.
Software version Manual version Description
V1.1 V0311 first issue V1
V1.3 V0811 update to V1.3
V1.4 V1011 update to V1.4
V1.5 V0212 update to V1.5
V2 V1212 update to V2.1
V2.2 V0613 update to V2.2
V2.3 V0913 update to V2.3

Delem DA-66T Specifications

General

Input Voltage	24V DC
Control Axis	up to 6 axes
3D Visualization	Yes
Servo/Proportional Valves	Yes
Offline Software	Yes
Display	color touchscreen
Communication Interface	Ethernet
Programming Language	G-code
Control System	CNC
Compatible Machine Types	Press brakes
Software Features	Collision detection