Pag 126 / 154
Manuale Lyra 600 sx elettr eng
Chain, sprockets, gears and general mechanical parts
Proceed as follows:
a) Dismantle the back guard, by removing the bolts that fasten it to the machine body.
b) Grease all the transmission chains (General grease), the chains can be greased by the
aid of a paint brush. In alternative you can also use grease spray for chains (Agip Recol
chain drive spray or Kluber-Unimoly 007).
c) After having completed the above operation, re-assemble all the guards previously
removed. Do not for any reason switch on the machine before having carried out this
operation.
ATTENTION
During this operation do not smear the manifolds of the sealing jaw.
Grease for
general use,
sprockets and
gears
To Next Page
Loading...