Pag 103 / 154
Manuale Lyra 600 sx elettr eng
Fig. 15.3 View of infeed conveyor chain
Fig. 15.4 Illustration of how to remove the pushers
ATTENTION
The lever of the gear shift can be adjusted only whilst the machine is running at a
low speed.
15.1 Pusher dismantling and assembly
To remove the long and short pushers proceed by moving the pusher forwards as shown in
(Fig. 15.4 pos. 1). If the pusher is small use a pair of pliers. To assemble the pusher
proceed in a conversely.
Pay attention that the pusher is inserted firmly in the pusher holder.
To Next Page
Loading...