On this page all the alarms are visualized by a yellow flashing light, the alarms can be
reset by pushing button position 1 (reset).
1) Button to re-set alarms (reset).
2) Button to go back to the previous page.
3) Button to exit from the alarm page.
4) Emergency stop button active.
5) Guard open alarm.
6) Safety clutch on sealing transverse sealing jaw alarm.
7) Alarm for air deficiency.
10) Alarm to indicate that the number of bags imposed on the product counter has been
reached.
14) Alarm printer (optional).
17) Alarm for maintenance (optional).
19) Alarm for triggering of motor thermal switch for infeed conveyor control.
25) Alarm for triggering of motor thermal switch for fin seal wheels control.
26) Alarm for triggering of motor thermal switch for rotary transversal sealing unit.
30) Alarm involving motor of out feed conveyor.
Other indications will follow on the next page.
To Next Page
Loading...