1) Button to switch to the alarm page.
In the presence of active alarm the color of the triangle button is yellow.
2)
Button for ON/OFF
electronic clutch limiter.
Button green = ON - Button grey = OFF.
3) Key to return to the previous page.
4) Button to close this page.
5) By pressing this button you can set the activation threshold value of the electronic limiter
for the not cutting-sealing part of the transversal sealing jaws.
6) By pressing this button you can set the activation threshold value of the electronic limiter
for the sealing of the transversal sealing jaws.
7) By pressing this button you can set the activation threshold value of the electronic limiter
for the cutting part of the transversal sealing jaws.
5A – 6A – 7A) Peak values concerning.
8) By pressing this button you can set the activation
threshold value of the electronic limiter for the fin wheels.
9) By pressing this button you can set the activation
threshold value of the electronic limiter for the motorized reel (optional).
10) By pressing this button you can set the activation
threshold value of the electronic limiter for the infeed conveyor.