Delfin LYRA - Page 18

Pag 18 / 154
Manuale Lyra 600 sx elettr eng
2.3.1 Dangers present in the machine’s work zone
DANGER
The sub-zones of the machine’s work zone (ZB-ZC-ZD-ZE-ZF fig. 2.3.1) are
dangerous due to the presence of mechanical hazards:
 moving elements approaching fixed parts;
 moving elements;
 rotating elements;
 sharp edges.
2.3.2 Specific warnings for the operator
ATTENTION
The operator must not for any reason whatsoever:
 try to introduce parts of his body into the machine’s work zones (Z fig. 2.3.1) when this
is started up or running;
 start up the machine when there are people exposed in proximity with the work zone (Z
fig. 2.3.1);
 tamper with the interlock devices applied on the mobile guards or dismantle the fixed
guards.
ATTENTION
 Before starting up the machine, the operator will have to make sure that there is nobody
or no foreign objects in the work zone (Z fig. 2.3.1) and that all the guards (fixed or
moveable) are correctly positioned.
 Access to the machine’s work zone (Z fig. 2.3.1) for machine preparations is allowed
only for the assigned staff, with the machine at a standstill or in IMPULSE active mode.
 Access to the machine’s work zone (Z fig. 2.3.1) for machine cleaning and maintenance
is allowed only for the assigned staff, with the machine at a standstill and with the
electrical and pneumatic power feeds cut off.