Installing Optional Accessories 89
When wireless ad-hoc mode is set to the printer:
Select Computer to Computer (ad hoc) networks only and close the
Advanced dialog box.
When wireless infrastructure mode is set to the printer:
Select Access point (Infrastructure) networks only and close the
Advanced dialog box.
h
Click
Add
to display
Wireless network properties
.
i
Enter the setting that you will send to the printer and click
OK
.
j
Click
Move up
to move the setting to the top of the list.
k
Click
OK
to close the
Property
dialog box.
For Windows Vista:
a
Open
Control Panel
.
b
Select
Network and Internet
.
c
Select
Network and Sharing Center
.
d
Select
Connect to a network
.
e
Select the setting you send to the printer from the network items listed in
Connect to a network
.
f
Select
Connect Anyway
in the warning dialog box indicating you are
entering an unsecured area.
g
Click
Close
in the dialog box after confirming the connection is a
success.
For Windows Server 2008:
a
Open
Control Panel
.
b
Select
Network and Sharing Center
.
c
Select
Connect to a network
.
d
Select the setting you send to the printer from the network items listed in
Connect to a network
.
e
Select
Connect Anyway
in the warning dialog box indicating you are
entering an unsecured area.
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
