217
Code Number BSP, APs,
Both
Meaning Display
SAL shadow top (PELoader + SAL_F).
0x87F6 BSP only Cache flush after PELoader shadow. South
0x07F6 BSP only Hang, on ERROR. South
0x87F5 BSP only
Search for information on SAL_F module
(sal_f_module_12).
By size, align, and scratch buff size.
South
0x07F5 BSP only Then hang, if not found or Information ERROR.
SAL shadow bottom (PELoader + SAL_F)
Find SAL_F page size.
Align to next 32K boundary and save address and size.
South
0x87F4 BSP only Search for addition information SAL_F module
Initialize scratch buffer.
South
0x07F4 BSP only Then hang, if not found.
Else continue by saving in RAM.
South
0x87F3 BSP only Cache flush after SAL shadowed. South
0x07F3 BSP only Hang on ERROR. South
0x87F2 BSP only Initialize SAL data top address
Physical equals to virtual for runtime use and above 4G
Load Call backs for
byte/word checkpoint display entry and Address.
SAL PMI address
EFI to SAL call back address
SAL procedure address
SAL SST base and address
SAL procedure entry base inside SST
Buildtime address where SAL_PROC entry is stored
Buildtime GP
Runtime GP
SAL SST size.
South
0x87F1 BSP only Load PAL module. South
0x87F0 BSP+APs
BSP Shadow PAL module, initialize PAL shadow base,
size, proc ptr initialize PAL procedure address entry &
checksum AP's PAL PMI base will be set.
South
0x07F0 BSP+APs Hang on ERROR. South
0x87EF BSP only Cache flush after PAL shadow. South
0x07EF BSP only Hang on ERROR. South
0x87EE BSP only Find PAL shadow size + align through SAL call. South
0x07EE BSP only Hang on ERROR. South
0x87ED BSP only
Find # of CPUs present in the system, # of CPU, # of
IOAPIC.
South
0x07ED BSP only Hang on ERROR. South
0x87EC BSP only
Search for addition information EFI module
South
To Next Page
Loading...
