222
Code Value Module Display
0x0058
The memory size was adjusted for relocation and shadowing. Clearing the
Press F2 message.
South
0x0059
The Press F2 message is cleared. Starting the DMA and interrupt
controller test next.
South
0x0060
The DMA page register test passed. Performing the DMA Controller 1
base register test next.
South
0x0062
The DMA controller 1 base register test passed. Performing the DMA
controller 2 base register test next.
South
0x0065
The DMA controller 2 base register test passed. Programming DMA
controllers 1 and 2 next.
South
0x0066
Completed programming DMA controllers 1 and 2. Initializing the 8259
interrupt controller next.
South
0x007F TBD. South
0x0080
Mouse initialization of PS/2 mouse to program the irq level to edge
triggered or level triggered. The keyboard test has started. Clearing the
output buffer and checking for stuck keys. Issuing the keyboard reset
command next.
South
0x0082
The keyboard controller interface test completed. Write the command byte
and initializing the circular buffer next.
South
0x0083
The command byte was written and global data initialization has
completed. Checking for a locked key next.
South
0x0084 Locked key checking is over. Identify ATAPI devices. South
0x0086 POST error codes displayed South
0x0087 Entering Setup South
0x0089
The programming after Setup has completed. Displaying the power on
screen message next.
South
0x008B Init boot devices. Check for and reset mouse. South
0x008C
Npost adjustments to setup. Form E820 tables. Program SETUP-selected
chipset and Sup-IO parameters.
South
0x008D The Setup options are programmed. Resetting the hard disk controller. South
0x008E
OEM patches executed. Decompress INT13 module and init ATA & ATAPI
devices.
South
0x0093 Done with ATA and ATAPI init. Set RS-232 time out. South
0x0095 Initializing the bus option ROMs from C800 next. SCSI opt ROM init. South
0x0091 Configuring the hard drive controller. Initializing the CD ROM drive. South
0x0092 IA-32 Option ROM execution. South
0x0098
The adaptor ROM had control and has now returned control to BIOS
POST. Performing any required processing after the option ROM returned
control. Restoring INT10 vector.
South
0x0099 Configuring the timer data area and printer base address. South
0x009B Returned after setting the RS-232 base address. South
0x009E
Checking the extended keyboard, keyboard ID, and Num Lock key next.
Issuing the keyboard ID command.
South
0x00A2 Displaying any soft errors. South
0x00A3 The soft error display has completed. Setting the keyboard typematic rate. South
0x00A4 Display the contents summary screen – proc data and PAL, SAL, revision. South
To Next Page
Loading...
