Dell PowerConnect W-Airwave - Page 27

AirWave Wireless Management Suite | Configuration Guide Aruba Configuration in AWMS | 27
Figure 17 Device Setup > Aruba Configuration > Aruba AP Groups > Add/Edit Details Page
The following section of this configuration guide provide additional information about configuring
Aruba AP Groups:
 “General Aruba AP Groups Procedures and Guidelines” on page30
6. Add or edit WLANs in Aruba Configuration as required.
a. Navigate to
Device Setup > Aruba Configuration > WLANs page. This page can display all WLANs
currently configured, or can display only selected WLANs.
b. Click
Add to create a new WLAN, or click the pencil icon to edit an existing WLAN.
You can add or edit WLANs in one of two ways, as follows:
 Basic—This display is essentially the same as the AOS Wizard View on the Aruba controller. This
page does not require in-depth knowledge of the profiles that define the Aruba AP Group.
 Advanced—This display allows you to select individual profiles that define the WLAN and
associated Aruba AP Group. This page requires in-depth knowledge of all profiles and their
respective settings.
The following sections of this configuration guide provide additional information and illustrations for
configuring WLANs:
 “General WLAN Procedures and Guidelines” on page33
 “WLAN Pages and Field Descriptions” on page56