Dell PowerConnect W-Airwave - Page 57

AirWave Wireless Management Suite | Configuration Guide Aruba Configuration Reference | 57
Excluded WLANs
Excluded WLANs N/A This section displays WLANs currently defined in Aruba Configuration by
default. This section can display selected WLANs or all WLANs. Use this
section to specify which WLANs are not to support AP Override.
Referenced Profiles
802.11a Radio
Profile
5_am Defines AP radio settings for the 5 GHz frequency band, including the
Adaptive Radio Management (ARM) profile and the high-throughput
(802.11n) radio profile.
Click the pencil icon next to this field to edit or create additional profile
settings in the RF > 802.11a/g Radio page of Aruba Configuration. Click
Save on this page to return to the Add AP Group page.
For additional information, refer to “Profiles > RF > 802.11a/g Radio” on
page116.
802.11g Radio
Profile
2.4_am Defines AP radio settings for the 2.4 GHz frequency band, including the
Adaptive Radio Management (ARM) profile and the high-throughput
(802.11n) radio profile. Each 802.11a and 802.11b radio profile includes a
reference to an Adaptive Radio Management (ARM) profile.
If you would like the ARM feature to select dynamically the best channel
and transmission power for the radio, verify that the 802.11a/802.11g radio
profile references an active and enabled ARM profile. If you want to
manually select a channel for each AP group, create separate 802.11a and
802.11g profiles for each AP group and assign a different transmission
channel for each profile.
The drop-down menu displays these options:
z default
z nchannel too high
z nchannel too low
Click the pencil icon next to this field to edit or create additional profile
settings in the RF > 802.11a/g Radio page of Aruba Configuration. Click
Save on this page to return to the Add AP Group page.
For additional information, refer to “Profiles > RF > 802.11a/g Radio” on
page116.
RF Optimization
Profile
default Enables or disables load balancing based on a user-defined number of
clients or degree of AP utilization on an AP. Use this profile to detect
coverage holes, radio interference and STA association failures and
configure Received signal strength indication (RSSI) metrics.
Click the pencil icon next to this field to display the Profiles > RF section
of Aruba Configuration, and edit these settings as desired. Click Save on
this page to return to the Add AP Group page.
For additional information, refer to “Profiles > RF > 802.11a/g Radio” on
page116.
Event Thresholds
Profile
default Defines error event conditions, based on a customizable percentage of
low-speed frames, non-unicast frames, or fragmented, retry or error
frames. The drop-down menu displays these options:
z default
z all additional RF profiles currently configured in Aruba Configuration
Click the pencil icon next to this field to display the Profiles > RF >
Events Threshold section of Aruba Configuration, and edit these
settings as desired. Click Save on this page to return to the Add AP
Group page.
For additional information, refer to “Profiles > RF > Event Thresholds” on
page123.
Table 6 Aruba Configuration > AP Overrides Add or Edit Page Fields
Field Default Description