User's Guide
- 103 -
3. Enter the appropriate information.
Note: A password may be required. If you do not have an ID and password, then contact your system
support person.
4. Enter a shortcut number.
If you enter a number that is already in use, then you are prompted to select another number.
5. Click Add.
Scanning to an FTP address
Scanning to an FTP address using a shortcut number
1. Load an original document faceup, short edge first into the ADF tray or facedown on the scanner
glass.
Notes:
- Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
- The ADF indicator light comes on when the paper is loaded properly.
2. If you are loading a document into the ADF tray, then adjust the paper guides.
3. From the printer control panel, press #, and then enter the FTP shortcut number.
4. Press
.
Scanning to an FTP address using the address book
1. Load an original document faceup, short edge first into the ADF tray or facedown on the scanner
glass.
Notes:
- Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
- The ADF indicator light comes on when the paper is properly loaded.
2. If you are loading a document into the ADF tray, then adjust the paper guides.
3. From the printer control panel, navigate to:
>FTP > > select the name of the recipient >
To Next Page
Loading...
