Develop ineo 3320 - Page 143

User's Guide
- 143 -
Use
To
Cancel Faxes
Allow
Don't Allow
Specify whether or not the printer cancels fax jobs.
Note: Allow is the factory default setting.
Fax number masking
Off
From left
From right
Specify the direction from where digits are masked in an outgoing fax number.
Notes:
• Off is the factory default setting.
• The number of characters masked is determined by the “Digits to mask”
setting.
Digits to Mask
0–58
Specify the number of digits to mask in an outgoing fax number.
Note: 0 is the factory default setting.
Enable Line Connected
Detection
On
Off
This will detect if a phone line is connected.
Enable Line in Wrong Jack
Detection
On
Off
This will detect if a phone line is connected but in the wrong jack.
Enable Extension In Use
Support
On
Off
This will detect if the extension line is in use (when a phone is plugged into the
second jack and in use).