Develop ineo 3320 - Page 151

User's Guide
- 151 -
Speaker Settings
Use
To
Speaker Mode
Always Off
On until Connected
Always On
Specify the mode of the speaker.
Notes:
• “On until Connected” is the factory default setting. A sound is issued until
the fax connection is made.
• “Always On” turns the speaker on.
• “Always Off” turns the speaker off.
Speaker Volume
High
Low
Control the volume setting.
Note: High is the factory default setting.
Ringer Volume
Off
On
Control the fax speaker ringer volume.
Note: On is the factory default setting.
Answer On
Use
To
All Rings
Single Ring Only
Double Ring Only
Triple Ring Only
Single or Double Rings Only
Single or Triple Rings Only
Double or Triple Rings Only
Specify ring patterns when the printer is answering calls.
Note: All Rings is the factory default setting.