Develop ineo 3320 - Page 156

User's Guide
- 156 -
Use
To
ADF Skew Fix
Auto
Off
On
Correct slight skew in the scanned image.
Note: Off is the factory default setting.
Scan edge to edge
Off
On
Specify whether the original document is scanned edge-to-edge.
Note: Off is the factory default setting.
Sharpness
1–5
Adjust the amount of sharpness on a scanned image.
Note: 3 is the factory default setting.
Use cc:/bcc:
Off
On
Enable the use of the cc: and bcc: fields.
Note: Off is the factory default setting.