Develop ineo 3320 - Page 159

User's Guide
- 159 -
Use
To
JPEG Quality
Best for content
5–90
Set the quality of a JPEG photo image in relation to the file size and quality of
the image.
Notes:
• “Best for content” is the factory default setting.
• 5 reduces the image quality and the file size.
• 90 produces the best image quality at an increased file size.
• This menu setting applies to all scan functions.
Text Default
5–90
Set the quality of the text in relation to the file size and quality of the image.
Note: 75 is the factory default setting.
Text/Photo Default
5–90
Set the quality of a text or photo image in relation to the file size and quality of
the image.
Note: 75 is the factory default setting.
Photo Default
5–90
Set the quality of a photo image in relation to the file size and quality of the
image.
Note: 50 is the factory default setting.
Use Multi-Page TIFF
On
Off
Choose between single-page TIFF files and multiple-page TIFF files.
For a multiple-page scan-to-FTP job, either one TIFF file is created containing
all the pages, or multiple TIFF files are created with one file for each page of the
job.
Notes:
• On is the factory default setting.
• This menu setting applies to all scan functions.
Transmission Log
Print log
Do not print log
Print only for error
Specify whether or not the transmission log prints.
Note: “Print log” is the factory default setting.
Log Paper Source
Tray [x]
Manual Feeder
Specify a paper source when printing FTP logs.
Note: Tray 1 is the factory default setting.