User's Guide
- 171 -
Auto CR after LF
On
Off
Specify whether the printer automatically performs a carriage return (CR)
after a line feed (LF) control command.
Note: Off is the factory default setting.
Auto LF after CR
On
Off
Specify whether the printer automatically performs a line feed (LF) after a
carriage return (CR) control command.
Note: Off is the factory default setting.
Assign MP Feeder
Off
None
0–199
Assign Tray [x]
Off
None
0–199
Assign Manual Paper
Off
None
0–199
Assign Manual Envelope
Off
None
0–199
Configure the printer to work with printer software or programs that use
different source assignments for trays and feeders.
Notes:
• “Off” is the factory default setting.
• “None” ignores the Select Paper Feed command. This option appears
only when it is selected by the PCL 5e interpreter.
• “0–199” allows a custom setting to be assigned.
To Next Page
Loading...
