User's Guide
- 214 -
Insufficient memory to collate job [37]
Try one or more of the following:
• From the printer control panel, select Continue to print the part of the job already stored and begin
collating the rest of the print job. For non-touch-screen printer models, press
to confirm.
• Cancel the current print job.
Insufficient memory to support Resource Save feature [35]
Install additional printer memory or select Continue on the printer control panel to disable Resource Save,
clear the message, and continue printing. For non-touch-screen printer models, press
to confirm.
Load manual feeder with [custom string] [paper orientation]
Try one or more of the following:
• Load the feeder with the correct size and type of paper.
• Depending on your printer model, touch Continue or press
to clear the message and continue
printing.
Note: If no paper is loaded in the feeder when Continue or
is selected, then the printer
automatically overrides the request, and then prints from an automatically selected tray.
• Cancel the current job.
Load manual feeder with [custom type name] [paper orientation]
Try one or more of the following:
• Load the multipurpose feeder with the correct size and type of paper.
• Depending on your printer model, touch Continue or press
to clear the message and continue
printing.
Note: If no paper is loaded in the feeder when Continue or
is selected, then the printer
manually overrides the request, and then prints from an automatically selected tray.
• Cancel the current job.
Load manual feeder with [paper size] [paper orientation]
Try one or more of the following:
• Load the multipurpose feeder with the correct size of paper.
To Next Page
Loading...
