Develop ineo 3320 - Page 35

User's Guide
- 35 -
1. From the printer control panel, navigate to:
>Settings > >Network/Ports > >Network [x] > >Network [x] Setup >
>Wireless >
>Wireless Connection Setup >
2. Select a wireless connection setup.
Use
To
Search for networks
Show available wireless connections.
Note: This menu item shows all broadcast secured or unsecured SSIDs.
Enter a network name
Manually type the SSID.
Note: Make sure to type the correct SSID.
Wi-Fi Protected Setup
Connect the printer to a wireless network using Wi-Fi Protected Setup.
3. Press
, and then follow the instructions on the printer display.
Connecting the printer to a wireless network using Wi-Fi Protected Setup (WPS)
Before you begin, make sure that:
• The access point (wireless router) is WPS certified.
• A wireless network adapter is installed in the printer and is working properly. For more information,
see the instruction sheet that came with the wireless network adapter.
Using the Push Button Configuration (PBC) method
1. From the printer control panel, navigate to:
>Settings > >Network/Ports > >Network [x] > >Network [x] Setup >
>Wireless >
>Wi-Fi Protected Setup > >Start Push Button Method >
2. Follow the instructions on the printer display.
Using the Personal Identification Number (PIN) method
1. From the printer control panel, navigate to:
>Settings > >Network/Ports > >Network [x] >Wireless > >Wi-Fi Protected
Setup >
>Start PIN Method >
2. Copy the eight-digit WPS PIN.