Digi Connect IT 4 User Manual

Interfaces Wide Area Networks (WANs)
Digi Connect IT® 4 User Guide
119
The Carrier Scan window opens.
4. (Optional) Change the Timeout for the carrier scan. The default is 300 seconds.
5. When the Carrier Scan window opens, the results of the most recent previous scan are
displayed. If there is no previous scan available, or to refresh the list, click SCAN.
6. The current carrier is highlighted in green. To switch to a different carrier:
a. Highlight the appropriate carrier and click SELECT.
The Carrier selection dialog opens.
b. For Carrier selection mode, select one of the following:
n Manual/Automatic: The device will use automatic carrier selection if this carrier is
not available.
n Manual: Does not allow the device to use automatic carrier selection if this carrier
is not available.
Note If Manual is selected, your modem must support the Network technology or
the modem will lose cellular connectivity. If you are using a cellular connection to
perform this procedure, you may lose your connection and the device will no longer
be accessible.
Command line

Digi Connect IT 4 Specifications

General

Brand	Digi
Model	Connect IT 4
Category	Network Router
Language	English