EasyManua.ls Logo

Digi Connect IT 4

Digi Connect IT 4
964 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Virtual Private Networks (VPN) OpenVPN
Digi Connect IT® 4 User Guide
402
l Set the amount of time to wait for the interface to connect for the first time
before the test is considered to have failed.
(config vpn openvpn client openvpn_client1 surelink tests 1)>
interface_timeout value
(config vpn openvpn client openvpn_client1 surelink tests 1)>
where value is any number of weeks, days, hours, minutes, or seconds, and
takes the format number{w|d|h|m|s}.
For example, to set interface_timeout to ten minutes, enter either 10m or
600s:
(config vpn openvpn client openvpn_client1 surelink tests 1)>
interface_timeout 600s
(config)>
n custom_test: Tests the interface with custom commands.
If custom_test is set, set the commands to run to perform the test:
(config vpn openvpn client openvpn_client1 surelink tests 1)>
custom_test_commands "string"
(config vpn openvpn client openvpn_client1 surelink tests 1)>
n tcp_connection: Tests that the interface can reach a destination port on the
configured host.
If tcp_connection is selected, complete the following:
l Set the hostname or IP address of the host to create a TCPconnection to:
(config vpn openvpn client openvpn_client1 surelink tests 1)>
tcp_host hostname/IP_address
(config vpn openvpn client openvpn_client1 surelink tests 1)>
l Set the TCP port to create a TCPconnection to.
(config vpn openvpn client openvpn_client1 surelink tests 1)>
tcp_port port
(config vpn openvpn client openvpn_client1 surelink tests 1)>
n other: Tests the status of another interface.
If other is selected, complete the following:
l Set the interface to test.
i. Use the ? to determine available interfaces:
(config vpn openvpn client openvpn_client1 surelink tests
1)> other_interface ?
Test interface: Test the status of this other interface.
Format:

Table of Contents

Related product manuals