Digital Projection Titan 930 - Image; Color

Digital Projection Titan Quad / 800 / 930 Series APPENDIX D: MENU MAP Reference Guide
176
Rev H October 2013
Main Menu Sub Menus
Image
Brightness (slider, value range -50 ~ 50 [0])
Contrast (slider, value range -50 ~ 50 [0])
Gamma , 1.0, 1.8, 2.0, 2.2, 2.4, 2.6, 2.8
Hue (slider, value range -50 ~ 50 [0])
Saturation (slider, value range -50 ~ 50 [0])
Black Level Offset 0 IRE, 7.5 IRE
V Position (slider, value range 0 ~ 200 [100])
H Position (slider, value range 0 ~ 200 [100])
Video Filters
Sharpness (slider, value range -50 ~ 50 [0])
Detail (slider, value range 0 ~ 3)
Luma Sharpness (slider, value range 0 ~ 2)
Chroma Sharpness (slider, value range 0 ~ 2)
Recursive NR (slider, value range 0 ~ 3)
Mosquito NR (slider, value range 0 ~ 3)
Cross Color Suppression Off, On
VGA Setup
Phase (slider, value range -50 ~ 50 [0])
Total H Samples (slider, value range -50 ~ 50 [0])
Auto Setup (command)
Color
Gamut Peak, HDTV, SDTV, 3200k, 5400k, 6500k, 8000k, 9000k, User 1, User 2
Red Black Level (slider, value range -50 ~ 50 [0])
Green Black Level (slider, value range -50 ~ 50 [0])
Blue Black Level (slider, value range -50 ~ 50 [0])
Red Gain (slider, value range -50 ~ 50 [0])
Green Gain (slider, value range -50 ~ 50 [0])
Blue Gain (slider, value range -50 ~ 50 [0])
Notes
Some of the information in this menu
map is summarised. See the actual
menu on the projector for full detail.
The underlined text represents
the factory default value for each
setting.