Using The Menus
Use the buttons on the projector control panel or on the remote control, to access the menu system.
• To open or close the on-screen display (OSD), press MENU.
Menus and sub-menus
• To open a sub-menu, select it using the UP and DOWN arrow buttons, then press OK.
• To return to the previous menu, press EXIT.
Notes
Some menu items may not be
available due to settings in other
menus. These will be grayed out on
the actual menu.
When a globe icon appears next
to a setting, the setting affects all
sources and all inputs; otherwise,
only the current input source will be
affected if you change the setting.
To Next Page
Loading...
