Geometry Engine
Choose from Keystone, Cornerstone, Rotation, Warp or Off.
• If Geometry Engine is set to Keystone, set the H Keystone and V Keystone sliders to correct
for any distortion caused by the projector being in a different horizontal or vertical plane to the
screen.
1
The projector is positioned at an angle
2
The resulting image is distorted
3
The image is corrected when Keystone is applied
Notes
Main Menu
Geometry
Some items on this menu may
be unavailable depending on the
Geometry Engine setting.
If possible, position the projector
facing the screen at a right angle to
avoid geometry corrections.
1 2 3
To Next Page
Loading...
