Digital Projection Titan 930 User Manual

Digital Projection Titan Quad / 800 / 930 Series APPENDIX D: MENU MAP Reference Guide
175
Rev H October 2013
Appendix D: Menu Map
Main Menu Sub Menus
Input Selection
All models: Composite 1, Composite 2, S-Video, Component, VGA, 3G-SDI, DVI, HDMI, Test Pattern
3D models only: Main/DVI, Sub/HDMI, Dual Pipe
Test Pattern
Gray V Bars, Gray H Bars, Aspect Test, Alignment Grid, Warp Adjust, SMPTE, Chequerboard, White Field, Black
Field, Convergence, Screen Layout
Lens
Zoom In (command)
Zoom Stop (command)
Zoom Out (command)
Focus Near (command)
Focus Stop (command)
Focus Far (command)
Calibrate Zoom (command)
Calibrate Focus (command)
Center Lens (command)
Nudge
Up (command)
Down (command)
Left (command)
Right (command)
Lens Presets
Save 1 (command)
Save 2 (command)
Save 3 (command)
Save 4 (command)
Save 5 (command)
Recall 1 (command)
Recall 2 (command)
Recall 3 (command)
Recall 4 (command)
Recall 5 (command)
Notes
Some of the information in this menu
map is summarised. See the actual
menu on the projector for full detail.
The underlined text represents
the factory default value for each
setting.

Digital Projection Titan 930 Specifications

General

Brand	Digital Projection
Model	Titan 930
Category	Projector
Language	English