Digital Projection Titan 930 - Information menu

Digital Projection Titan Quad / 930 / 800 Series USING THE PROJECTOR Operating Guide
89
Rev H October 2013
Information menu
This menu gives information about lamp operating times, software and hardware conguration, input
source and network settings.
Lamps
This menu gives information about lamp hours, starts and voltages.
Notes
The values shown in the menus on
this page are examples and may
differ signicantly on your OSD.
Main Menu
Information
Main Menu
Information
Lamps
Lamp information differs between
dual lamp and quad lamp projectors.
These illustrations refer to a dual
lamp model.
Main Menu
Information
Lamps
Lamp Voltages