Distech ECYPSE - Page 29

ECLYPSE Controller IP Network Protocols and Port Numbers
ECLYPSE User Guide 29
Service
Default Port
Number
(Protocol)
Description
Where can this
port number be
changed?
Radius
Server
1812 (UDP)
Authentication Port: This is the port on
which authentication requests are made.
See User
Management on
page 85. If this is
used with
EC-Net
AX
, these
parameters must
be set in the
RadiusService.
Radius
Server
1813 (UDP)
Accounting Port: This is the port on which
accounting request are made. This is only
used to receive accounting requests from
other RADIUS servers.
Radius
Server
1814 (UDP)
Proxy Port: This is an internal port used to
proxy requests between a local server and
a remote server.
BACnet/
IP
47808 (UDP)
The BACnet over IP protocol.
See BACnet
Settings on page
77.