Distech ECYPSE - First Time Connection to an ECLYPSE Controller

First Time Connection to an ECLYPSE Controller
52 ECLYPSE User Guide
CHAPTER 6
FIRST TIME CONNECTION TO AN ECLYPSE
CONTROLLER
This chapter describes how to get started with an ECLYPSE controller. This includes discovering the
controller on the network using the XpressNetwork Utility and gaining access to the controller’s
configuration interfaces.
In This Chapter
Topic
Page
Connecting to the Controller
53
Ethernet Network Connection
54
Wi-Fi Network Connection
57
Configuring the Controller
58
Connecting to the Controller’s Configuration Web Interface
60