Distech ECYPSE - Wireless Network Commissioning Architectures; Client to Access Point Configuration

Connecting IP Devices to an IP Network
ECLYPSE User Guide 49
Wireless Network Commissioning Architectures
Client to Access Point Configuration
A laptop is connected through Wi-Fi, as a Wi-Fi client, to any Connected VAV Controller that
has its wireless settings configured as an Access Point. The other Connected VAV
Controllers are configured as Wi-Fi Clients and are wirelessly connected to the same Access
Point.
With this configuration, the laptop and all the ECLYPSE controllers are on the same subnet,
so the laptop user has access to all networked ECLYPSE controllers.
Wi-Fi Client
Wired IP
Daisy Chain
Maximum 30 controllers on the daisy chain
Wi-Fi
Access Point
Wi-Fi
Client
Wi-Fi
Client
Wi-Fi
Client
Wi-Fi
Client
Wi-Fi
Access Point
Wi-Fi
Client
Wi-Fi
Client
Wi-Fi
Client
Wi-Fi
Client
Subnet 1
Figure 5-24: Client to Access Point Configuration