Connecting IP Devices to an IP Network
40 ECLYPSE User Guide
Figure 5-10: Angle of Radio Waves
A solution to avoid an obstruction is to add another wireless router located closer to the
controller(s).
ECLYPSE Wi-Fi Adapter Mounting Tips
This section provides information and examples on how to properly position the ECLYPSE
Wi-Fi Adapter to ensure reliable wireless communication. The most common guidelines to
remember when installing the ECLYPSE Wi-Fi Adapter is to keep it at least 1ā (2.5 cm) away
from metal, and never install the ECLYPSE Wi-Fi Adapter inside a metal enclosure (relay
panels, junction box, etc.).
Typical VAV Installation
The following image shows where to install an ECLYPSE Wi-Fi Adapter on a metal duct
with a VAV controller installation to maximize wireless performance.
Antenna & receiver on
top OR bottom
*Bottom is the preferred
position
Keep away from metal
Antenna & receiver installed
directly on metal should be
avoided
Figure 5-11: Typical VAV installation ā One ECLYPSE Wi-Fi Adapter
Typical VAV Installation within a Metal Enclosure
The next example shows where to install an ECLYPSE Wi-Fi Adapter when a VAV
controller is located inside a metal box. The ECLYPSE Wi-Fi Adapter should be installed
on the outside of the metal box, on the top or bottom of the box.
To Next Page
Loading...